Ultravolt Support Website in Taiwan 高壓放大器 高壓電源供應器 高壓模組

首頁
“C” SERIES
“A” SERIES
“AA” SERIES
“E” SERIES
“10A→25A” SERIES
“30A→40A” SERIES
HIGH POWER “8C→30C” SERIES
HIGH POWER “C” SERIES
BI-POLAR HIGH POWER “C” SERIES
應用實做範例
電路設計範例
電路機構設計
平均使用壽命
安規品質認證

點選 CDN雲端快速鏡像網站 加速您的瀏覽體驗

Contact Us!點我立即連絡!

support_1.jpg

市場應用

1. 掃描電子顯微鏡 (Scanning Electron Microscope) (SEM)
2. 歐傑電子光譜儀 (Auger Electron Spectroscopy) (AES)
3. X光射線 (X-Ray)
4. 離子束 (ION-Beam)
5. 電子束蒸鍍/蒸發 (Electron Beam Evaporation)
6. 等離子體加工系統 (Plasma Processing System)
7. X光射線管 (X-Ray Tube)
8. X光射線晶相儀器 (X-Ray Crystal Orientation Instrument)
9. 紫外線長弧燈(UV Long Arc Lamp )
10. 紫外線長弧燈高壓電源供應器(High )Voltage Power Supply For UV Long Arc Lamp)

11. 軍規高壓電源模組 (MIL-STD-810 High Voltage Module)

 

Welcome to the website of Ultravolt's distributor in Taiwan

UltraVolt, Inc. is a world-leading manufacturer of High Voltage Power Supplies ranging from 62 V to 40 kV for power levels ranging from 4 to 250 watts. Bentech is distributor in Taiwan.

 

高壓放大器 高壓電源供應器 高壓模組 NEW!60KW高壓電源供應器

高壓放大器

HVA 高壓任意波形放大器,線性精度0.01%,負載精度 0.01%,

可放大電壓1,000倍至10KV。(頻率範圍DC~1KHz)

HVA Series

 

Precision High Voltage Amplifier 

The HVA Series of DC-to-DC high-voltage power supplies operates a precision filter/divider & linear HV switch to produce a High-Voltage Amplifier (HVA). These modules provide a high-resolution, programmable, high-voltage DC to greater than 1 kHz output. The HVA Series is optimized for bias applications while providing excellent line regulation, load regulation, dynamic response, and stability. The HVA Series can both source and sink current! 

Typical applications for this series include electrostatic chuck, pockel cells, mass spectrometry, and electron microscopes. 

 

• Can both source and sink current 
• PPM level line & load regulation 
• Bipolar models available at 0 to ±5kV 
• Differential precision 0 to 10VDC control input 
• Precision voltage and current monitors

• Unipolar models available at 0 to 10kV 
• 25ppm temperature coefficient (15ppm optional) 
• Operates in DC, reversible, and amplifier modes 
• Fast slew rate (40V/μs) 
• High bandwidth

 

20HVA 高壓任意波形放大器,線性精度0.01%,負載精度 0.01%,

可放大電壓2,000倍至20KV 。(頻率範圍DC~500Hz)

10HVA-20HVA Series

 

Precision High Voltage Amplifier 

The 10HVA-20HVA Series of DC-to-DC high-voltage power supplies operates a precision filter/divider & linear HV switch to produce a High-Voltage Amplifier (HVA). These modules provide a high-resolution, high-voltage DC to full scale waveform capability greater than 500 Hz output. 10/15/20kV HVA modules are optimized for bias applications while providing excellent line regulation, load regulation, dynamic response, and stability. The HVA Series can both source and sink current operating linearly through 0V with low ripple and noise over the entire output range! 

Typical applications for this series include the following: 

Drivers for electro hydrodynamics, electrostatic chuck, Pockel’s cells, laser & electro-optic modulation, electrophoresis. 

Amplifiers for ion beam and electron beam devices such as mass spectrometry, and electron microscopes as well as electrostatic deflection/focusing, flocking, coating, electro spinning, precipitation and electro coalescence. 

 

• Bipolar models available at 0 to 10kV, 15kV, 20kV
• Unipolar models available at 0 to 15kV & 20kV
• Operates in DC, reversible, and amplifier modes
• Fast slew rate (40V/μs) and high bandwidth at an excellent value
• Can both source and sink current

• PPM level line & load regulation
• 25ppm temperature coefficient
  (15ppm optional)
• Reduced ripple option available
• Differential precision 0 to 10VDC control input
• Precision voltage and current monitors

高壓電源供應器

BR-GP 經濟型高壓電源供應器(3W@30KV)

BT-GP Series

 

Bench top High Voltage Power System 

The compact, high-voltage BT-GP Series of general purpose bench-top high voltage power systems offers adjustable output voltage, LCD digital voltage reading, highly stable output, and low ripple. BT-GP Series units are available in positive or negative polarity and with the option of one or two output connectors. 

Applications for BT-GP Series high-voltage power systems include electrostatic, air purification, process fluid cleaning, hi pot testing, and laboratory research 

 

• Available from 0 to 1kV through 0 to 30kV 
• Up to 30W of output power 
• 3.5 digit LED output voltage display 
• Bench-top configuration 
• Single positive or negative output

• Ruggedized steel enclosure 
• Enters constant current mode when fault occurs 
• Highly portable with built in carrying handle (AC model) 
• Protection against overload, short circuit, arc, and reverse polarity

 

BR-GP 電子束高壓電源供應器

MMS-eB Series

 

Multi-Module Solution – Electron Beam HV Power System 

The multi-module solution - electron beam, or the MMS-eB Series, provides all the power sources needed to operate a variety of industry-standard precision electron guns. This highly advanced solution offers exceptional performance, including PPM level temperature coefficient, ripple, regulation, and stability. The MMS-eB Series is configurable as a 3-, 4-, or 5-bias electron gun high-voltage power supply for beam, filament, extractor, suppressor, and lens voltages. Users can specify which UltraVolt modules to place within the system, selecting from standard E Series and A-F Series power supplies.
 
• Optimal for electron guns
• Exceptional stability and ultra-low noise
• PPM level temp coefficient, ripple, regulation and stability
• Half-quiet and Full-quiet mode capability
• Wide variety of cables and connectors available
• <200ppm to <1ppm ripple
• <300ppm 3-year output stability
• Low common mode noise

 

MCP 高壓電源供應器 (15KW@2KV)

MCP Series

 

Floating Output High Voltage Power System 

The MCP Series of high-voltage rack mount and bench-top power systems is a fully-featured chassis that enables users to reach higher levels of power, up to 15kW. The broad range of voltage and power levels make the MCP Series suitable for a broad range of industries and applications. Users will also benefit from the high performance of the system, which includes low ripple, excellent regulation, floating output, and a low stored energy.
 
• Floating output voltage up to 2kV 
• Output power from 0 to 12W up to 15kW 
• ½19" rack mount, 19" rack mount, or bench-top case 
• Efficiency at 90%
• Fully programmable by 10-turn potentiometer 
• Voltage and current monitors on all models 
• Multiple computer interfaces available

 

HCP 高壓電源供應器 (15KW@300KV)

HCP Series

 

Floating Output High Voltage Power System 

The HCP Series of high-voltage rack mount and bench-top power systems is a fully-featured chassis that enables users to reach higher levels of power, up to 15kW. The broad range of voltage and power levels make the HCP Series suitable for a broad range of industries and applications. Users will also benefit from the high performance of the system, which includes low ripple, excellent regulation, floating output, and a low stored energy.
 
• Output voltage up to 300kV 
• Output power from 0 to 12W up to 15kW 
• ½19" rack mount, 19" rack mount, or bench-top case 
• Efficiency at 90%
• Fully programmable by 10-turn potentiometer 
• Voltage and current monitors on all models 
• Multiple computer interfaces available

 

HCE 模組式高壓電源供應器 (350W@35KV)

HCE Series

 

High Voltage Cassette 

The HCE Series of high-voltage regulated AC-DC converters addresses the need for plug in HV modules that allow the system designer to build out a rack chassis as need. The modules are AC line operated fully integrated plug in HV modules with full features for local/remote analog controls & monitoring at good performance. Designed and built utilizing state-of-the-art power-conversion topology, these units feature design, manufacturing process, and encapsulation techniques that provide high reliability. 

Typical applications for this series include the following: 
Capital Equipment Designers can select multiple modules to create sub-systems to operate process control, manufacturing, test & measurement, and analysis machines for operating detectors, emitters, electrostatics, and actuators.
R&D system designers can select multiple modules to develop experiments, proof-of-concept equipment, and one-of-a-kind devices.
• 11 models provide fixed outputs of 0 to 125V through 35kV 
• 0 to 7, 35, 140 or 350 watts of output power 
• Input of 115VAC or 230VAC 
• Compatible with Euro cassette rack & 19" rack chassis 
• Indefinite output short-circuit protection & arc protection
• Remote control & monitors: - Constant Voltage/Constant Current Control (CVCC) - Output Current & Voltage Monitors - Remote TTL Enable / Disable Control 
• Front panel controls & monitors: - AC power switch, Local/Remote control switch - Screwdriver set Constant Voltage/Constant Current Controls (CVCC) with LED mode indicators - Output current & voltage monitor jacks with GND jack for meter

 

HV Rack 機架式高壓電源供應器 (1KW@40KV)

HV Rack® Configurable Series

 

High Voltage Rack Mount Power System 

The HV Rack Configurable power system is a fully featured, configurable chassis, enabling end users to select and to specify the UltraVolt high-voltage power supply (HVPS) operating in each channel from UltraVolt's catalog of more than 600 models. This combination provides accurate control and measurement of high-voltage power supply and HV system performance. 

For instructions on how to operate the HV Rack Configurable Series power system, download the HV Rack Configurable instruction manual. You can also download the manual for the USB Interface Option. You can also review the HV Rack Configurable standard, remote-control-interface connections 
• 1 to 4 configurable high-voltage output channels 
• Voltage ranges from 0 to 62VDC through 40kV 
• 4 to 1000 watts per channel, up to 1000 watts total
• Independent control & monitoring of each channel
• Voltage and Current meters for each channel 
• Constant current / Constant voltage auto-crossover 
• Pre-set before & during bias capability 
• PLC Analog/Digital Remote operation capability

 

HPV 高功率高壓電源供應器 (60KW@200KV)

HPV Series

 

High Power High Voltage Power Supply 

The HPV Series of High-Power / High-Voltage regulated AC to DC power supplies deliver high performance energy for higher reliability 24/7 applications & environments such as medical, industrial, manufacturing, agriculture, food processing, and research equipment. The HPV Series has high control speed, high accuracy, and high efficiency (85%) compared to other devices of this type. 

Typical applications for this series include the following: 
High-power electron beams in industrial applications such as electron beam welding, coating, linking, and surface treatment.
High-power electron tubes such as Triodes, Tetrodes, Klystrons, X-ray tubes.
High-power high voltage for accelerators, ion beams, pulsed power, electrostatic precipitators, medical, and research equipment.
 
• 7 Models from 0 to 60kV through 200kV 
• 6 Models from 0 to 6kW through 60kW 
• Single-output & multi-output configurations available 
• E-Beam configurations with floating Wehnelt, filament, and surge outputs
• Available with Voltage regulation, Current regulation, and Emission regulation 
• No minimum load required 
• Short-circuit protection & arc protection 
• Low ripple option

 

高壓模組  快速選取您所需要的高壓電源模組

New!! 高壓電源的應用

"PXS" SERIES
• Unipolar models 50V through 300V
• Bipolar models ±25V through ±150V
• Volume: 0.1in³ (1.639cc)
(preliminary PDF data sheet)

 "AUX" Series - Triple Output
Triple Output AUX Series, Adds Focus and Grid Outputs
Adjustable regulated outputs, Encapsulated within 10A-35A Series
Creates a 6.5 in³ triple output supply, High power density

(preliminary PDF data sheet)

"US" Series - Microsize, Regulated High Voltage DC-DC Converter
High Voltage Bias from 0 to 200V, 300V, 400V, or 500V @ up to 100mW
Input Voltage of 5VDC, 12VDC, 15VDC
0.35in³ (5.75cm³) volume
(preliminary PDF data sheet)
"XS" Series - Extra-Small, Microsize, Regulated HV DC-DC Converter
High Voltage Bias from 0 to 100V @ up to 100mW
Input Voltage of 5VDC
0.08in³ (1.3cm³) volume
(preliminary PDF data sheet)
"V" Series - Vertical Microsize, Regulated High Voltage DC-DC Converter
High Voltage Bias from 0 to 1500V @ up to 1W
Input Voltage of 12VDC, 15VDC, or 24VDC
0.84in³ (13.8cm³) volume
(preliminary PDF data sheet)
"M" Series - Miniature, Microsize, Regulated High Voltage DC-DC Converter
High Voltage Bias from 0 to 1500V @ up to 1W
Input Voltage of 12VDC, 15VDC, or 24VDC
1.28in³ (20.9cm³) volume
(preliminary PDF data sheet)
"E" Series - Precision High Voltage Power Supplies
Precision high-voltage module 0 to 15kV @ 4W, 15/20W, and 30W

10PPM temperature coefficient & <10PPM ripple
(PDF data sheet)
“TF” Series - High Voltage Divider
Test Fixture to make accurate inline measurements
of high voltage power supplies and systems from 35Hz to 10MHz up
to 40kV DC, in only 16.24 in³. (PDF data sheet)
"EFL" Series - Enhanced Floating 'Hot Deck' Low Voltage Power Supplies
Floating "Hot Deck" isolation module with <10nA leakage @15kV
Provides an additional isolated analog I/O channel

(PDF data sheet)

"FIL" Series - Non-isolated Precision Filament Supplies
High precision and high stability filament supply from 0 to 5VDC @ 0 to 3A

(PDF data sheet)

"FL" Series - Floating 'Hot Deck' Low Voltage Power Supplies
Floating "Hot Deck" isolation module with <10nA leakage @15kV
Includes analog I/O, digital I/O & LVPS all isolated to 15kV
(PDF data sheet)

請根據下列的表格,依據電壓/電流的選項,點選下面的圓點,可以連結到產品網頁。

附註: HIGH POWER "C" 紫色圓點, 8KV及以上為 HIGH POWER “8C→30C” SERIES

         HIGH POWER "C" 紫色圓點, 6KV及以下為 HIGH POWER “C” SERIES

應用實做範例電路設計範例電路機構設計平均使用壽命安規品質認證

特色:

  • 平均使用時間最長,節省您的時間與金錢
  • 通過多種安規認證,讓您設計的產品更有保障
  • 漣波雜訊最小,提昇您的高壓電源品質

其他高壓應用

  • 離子注入 (Ion Implantation)
  • 掃描電子顯微鏡 (Scanning Electron Microscopes)
  • 光譜 (Spectroscopy)
  • 質譜 (Mass Spectrometry)
  • 液晶屏製造 (Flat Screen Manufacture)
  • 離子束系統 (Ion Beam Systems)
  • 食品檢驗 (Food Inspection)
  • 行李安檢 (Baggage Screening)
  • X射線行程控制 (Process Control X-ray)
  • X射線衍射 (X-ray Diffraction)
  • 工業激光器 (Industrial Lasers)
  • 醫療激光器 (Medical Lasers)
  • 彩光 (Intense Pulsed Light)
  • 電子束焊接 (Electron Beam Welding)
  • 工業噴墨打印 (Industrial Ink Jet Printing)
  • 過程控制 (Process Control)
  • 熱敏打印機 (Thermal Printers)
  • 醫療設備 (Medical Devices)
  • 科學儀器 (Scientific Instrumentation)
  • 精密工程 (Precision Engineering)
  • 光電倍增管 (Photomultipliers)
  • 濺射 (Sputtering)
  • 真空離子泵 (Vacuum Ion Pumps)
  • 電容充電 (Capacitor Charging)
  • 真空蒸鍍 (Vacuum Deposition)

 


[首頁] [“C” SERIES] [“A” SERIES] [“AA” SERIES] [“E” SERIES] [“10A→25A” SERIES] [“30A→40A” SERIES] [HIGH POWER “8C→30C” SERIES] [HIGH POWER “C” SERIES] [BI-POLAR HIGH POWER “C” SERIES] [應用實做範例] [電路設計範例] [電路機構設計] [平均使用壽命] [安規品質認證]

     

新 北 市 汐 止 區 康 寧 街 169 巷 23 號 7 樓 之 一

公司電話:+886-2-2695-8906(代表號)

 02-2695-6755, 02-2695-7011, 02-2695-7033

公司傳真:+886-2-26958911

朱奕政 分機:24 kevin@bentech-taiwan.com

上次更新日期: 2016年06月02日。