高壓電源供應器

 

Contact Us!點我立即連絡!

 

http://ultravolt.bentech-taiwan.com/

support_1.jpg

 

桌上型高壓電源供應器 (6W, 6KV)

桌上型高壓電源供應器 (30W, 30KV)  

機架式高壓電源供應器 (250W x 4, 40KV)

機架式高壓電源供應器 (10KW, 1.2KV)

機架式高壓電源供應器 (60KW,  1.2KV)

機架式高壓電源供應器
(10KW, 700VAC / 1000VDC)

 

桌上型高壓電源供應器 (6W, 6KV)   

· Configurable from 0 to 100V through 0 to 6kV
· 100mW to 6W of output power
· Universal 85-264VAC input
· Bench-top configuration
· Single positive or negative output
· A wide range of outputs
· Current and/or voltage monitoring
· Available in either analog or digital versions
· Protection against overload, short circuit and arc

BT Series

High Voltage Bench-top High Voltage Power System 
The compact, high-voltage BT Series of AC-DC bench-top high voltage power systems with adjustable output voltage offers stand-alone and remote operation modes. For stand-alone operation, the power system is fitted with front panel controls. For remote operation, it can be configured with analog controls or digital controls such as a serial interface supporting a RS232/ RS485 serial port. 
The BT Series houses a high-voltage power supply from UltraVolt's line of microsize/micropower products. 

 

桌上型高壓電源供應器 (30W, 30KV)

· Available from 0 to 10kV through 0 to 30kV
· Up to 30W of output power
· 3.5 digital LCD output voltage display
· Bench-top configuration
· Single positive or negative output
· Ruggedized steel enclosure
· Enters constant current mode when fault occurs
· Highly portable with built in carrying handle (AC model)
· Protection against overload, short circuit, arc, reverse polarity

BT-GP Series
Benchtop High Voltage Power System
The compact, high-voltage BT-GP Series of general purpose bench-top high voltage power systems offers adjustable output voltage, LCD digital voltage reading, highly stable output, and low ripple. BT-GP Series units are available in positive or negative polarity and with the option of one or two output connectors.
Applications for BT-GP Series high-voltage power systems include electrostatic, air purification, process fluid cleaning, hi pot testing, and laboratory research.

 

機架式高壓電源供應器 (250W x 4, 40KV)

· 1 to 4 configurable high-voltage output channels
· Voltage ranges from 0 to 62VDC through 40kV
· 4 to 1000 watts per channel, up to 1000 watts total
· Independent control & monitoring of each channel
· Voltage and Current meters for each channel
· Constant current / Constant voltage auto-crossover
· Pre-set before & during bias capability
· PLC Analog/Digital Remote operation capability

HV Rack® Configurable

High Voltage Rack Mount Power System 
The HV Rack power system is a fully featured, configurable chassis, enabling end users to select and to specify the UltraVolt high-voltage power supply (HVPS) operating in each channel from UltraVolt's catalog of more than 600 models. This combination provides accurate control and measurement of high-voltage power supply and HV system performance. 
For instructions on how to operate the HV Rack Series power system, download the HV Rack instruction manual. You can also download the manual for the USB Interface Option. You can also review the HV Rack standard, remote-control-interface connections 

 

機架式高壓電源供應器 (10KW, 1.2KV)

· Voltage ranges from 0 to 20VDC up to 1,200VDC
· Power levels from 0 to 2kW up to 10kW
· Master-slave option reaches power level of 90kW
· Very low ripple & noise
· Excellent line and load regulation
· Constant voltage, constant current, constant resistive, and constant power modes standard
· Computerized front panel, full controls, & display
· SD card memory function for loading user voltage/current curves
· Simulates modes CV, CC, CP, R, PV, & automotive
· Advanced measurements & data logging
· Optional computer control

 

HV Rack® Advanced
High Voltage Rack Mount Power System
The HV Rack Advanced Series of high-voltage rack mount power systems is a fully-featured chassis that enables users to reach higher levels of power for their applications. This sophisticated system features a computerized front panel, controls and display, SD card memory function for loading user voltage/current curves to simulate application, and offers advanced measurements and data logging. Users will also benefit from the high performance of the system, which includes low ripple and noise, and excellent regulation. In addition, customers can choose a master-slave option to reach a power level of 90kW!
Applications for the HV Rack Advanced Series include ATE systems, process-water treatment, waste water treatment, plating, and motor operation.

 

機架式高壓電源供應器 (60KW, 1.2KV)

· Voltage ranges from 0 to 40VDC up to 1,200VDC
· Power levels from 0 to 5kW up to 60kW
· Master-slave option reaches power level of 90kW
· Very low ripple & noise
· Excellent line and load regulation
· Constant voltage, constant current, constant resistive, and constant power modes standard
· Computerized front panel, full controls, & display
· SD card memory function for loading user voltage/current curves
· Simulates modes CV, CC, CP, R, PV, & automotive
· Advanced measurements & data logging
· Optional computer controls

 

HV Rack® HP Advanced Series
High Voltage Rack Mount Power System
The HV Rack HP Advanced Series of high-voltage rack mount power systems is a fully-featured chassis that enables users to reach very high levels of power for their applications. This sophisticated system features computerized front panel controls and display, and offers an SD card memory function for loading user voltage/current curves to simulate application, advanced measurements, and data logging. Users will also benefit from the high performance of the system, which includes low ripple and noise, and excellent regulation. In addition, HV Rack HP Advanced systems offer a master slave option to achieve 90kW of output power!
Applications for the HV Rack HP Advanced Series include ATE systems, process-water treatment, waste-water treatment, plating, and motor operation.

 

機架式高壓電源供應器 (10KW, 700VAC / 1000VDC)

· • Voltage ranges from 0 to 700VAC or 0 to 1000VDC per phase
• Power levels range from 0 to 250VA to 10,000VA
• Variable frequency from 1Hz to 2,000Hz
• Simulation of 1 or 3 phases
• Measures voltage, effective current, average value, peak current, active power, idle power, apparent power, power factor, and crest factor

• Max current of 80A per phase
• Excellent line and load regulation
• Optional digital interfaces include IEEE, RS 232 / 485, USB, LAN
• Computerized front panel, full controls, & display
• SD card memory function for loading three programmable curves
• Voltage and current mode operation

 

HV Rack® Advanced AC Series

The HV Rack Advanced AC Series is a rack mount AC source equipped with a linear power stage for securely supplying the load in power applications. Various computer interfaces provide a state-of-the-art connection to all common communication means. This system features a computerized front panel, controls and display, and offers advanced measurements.
The HV Rack Advanced AC Series can generate any waveform users input into an external oscillator. Voltage and current curves can be read via the external SD Card slot or permanently stored in system memory.

 


     

新 北 市 汐 止 區 康 寧 街 169 巷 23 號 7 樓 之 一

公司電話:+886-2-2695-8906(代表號)

 02-2695-6755, 02-2695-7011, 02-2695-7033

公司傳真:+886-2-26958911

朱奕政 分機:24 kevin@bentech-taiwan.com

上次更新日期: 2016年04月13日。